Thermal and Visible Camera
Operation
8
8.1 Thermal Camera
The full screen Thermal Camera is active in the Thermal mode and the Ther-
mal MSX® mode (digital camera image superimposed on thermal image).
Select the image type in the menu: Select button/Image Mode as described in
Section 5.4 Image Mode Menu.
The Thermal Camera lens is located on the back of the meter. Face the lens
toward the area of interest and view the image on the MR265 display.
Select the thermal image colour palette from the menu (
Colour). Choose
Iron, Rainbow, White hot, Black hot, or Arctic.
Figure 8.1 Colour Palette options
On the right side of the thermal images, a vertical bar graph provides a tem-
perature scale for convenience. The top of the scale shows the hotter pixels in
the frame, and the lower part of the scale shows the colder pixels. Digital
readouts appear on the top and bottom of the bar graph to show the high and
low range limits for the camera image. See Figure 8.1.
#NAS100070; r. AB/77165/77326; en-GB
37
To Next Page
Loading...
