Moisture Measurement Operation
7
5. When the measurement exceeds the threshold, the text for the measure-
ment reading will appear red in colour. Note that in the Moisture-only
mode, the larger digits appear in red when the alarm limit is exceeded.
See Figure 7–14 below.
Figure 7.14 Moisture Alarm display examples
6. If the beeper is enabled in step 3 above, the beeper will sound when the
moisture exceeds the threshold. To silence the beeper when the meter is
alarming, press Select
. The meter will open the ‘Settings’ menu where
you can opt to turn the beeper OFF or otherwise program the alarm
parameters.
#NAS100070; r. AB/77165/77326; en-GB
36
To Next Page
Loading...
