FLIR MR265 - Image Mode Selection

User Interface Menus
5
5.4 Image Mode Menu
Figure 5.4 Image Mode Menu
The Image Mode Menu offers five sub-menus as described below.
• Thermal MSX® mode: Select this mode to see the digital camera image
superimposed over the thermal camera image. Use the Alignment Dis-
tance menu (next section) to align the digital and thermal images.
Figure 5.5 Thermal MSX® selection
• Alignment Distance control: This control allows you to adjust the super-
imposition of the visible image over the thermal image. Press Select
on
the Alignment Distance menu to open it, and then use the navigation but-
tons to adjust the alignment. Press Select to confirm the change.
#NAS100070; r. AB/77165/77326; en-GB
10