Moisture Measurement Operation
7
Figure 7.5 Moisture-only display mode
7.3 IGM™ Moisture and IGM™ Custom Modes
In the IGM™ Moisture mode
you can view a camera image with the
Moisture reading appearing on the upper left. Select this mode in the menu
(Measurement/IGM™ Moisture). IGM™ stands for ‘Infrared Guided Measure-
ments’. The Pin or Pinless display icon will appear next to the reading. To take
full advantage of this feature, scan for temperature variations, and use this
feedback to help you find areas of high moisture. For additional information
see Section 5.5 Measurement Menu.
Figure 7.6 IGM™ mode with Moisture reading shown on upper left
In the IGM™ Custom mode , you can view IR Temperature and Moisture
readings at the same time or only one of the two. To customize this display,
use the Settings menu, Section 5.8, (Settings/IGM™ Custom).
For additional information see Section 5.5 Measurement Menu.
#NAS100070; r. AB/77165/77326; en-GB
29
To Next Page
Loading...
