Need help?Do you have a question about the FLIR MSX MR277 and is the answer not in the manual?
General| Product Name | FLIR MSX MR277 |
|---|---|
| Category | Measuring Instruments |
| Thermal Resolution | 160 x 120 pixels |
| Image Frequency | 9 Hz |
| Focus | Fixed |
| MSX | Yes |
| Visual Camera | 5 MP |
| Laser Pointer | Yes |
| Moisture Measurement Type | Pin and Pinless |
| Laser Distance Meter | Yes |
| Battery Type | Rechargeable Li-ion battery |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Display | 3.5 in |
| Connectivity | Bluetooth, USB |
| Field of View | 57° x 44° |
| Accuracy | ±2°C (±3.6°F) or ±2% of reading |
| Thermal Sensitivity/NETD | <70 mK |
Critical warnings and cautions for safe device operation and hazard avoidance.
Selection of modes for moisture measurement: Material Groups, Pin, Pinless, MR12, Set Reference.
Procedures for taking moisture measurements using pinless or pin probes.
Methods for viewing moisture readings in Moisture-only mode or within camera views.
Utilizing IGM™ Moisture and IGM™ Custom for infrared guided measurements.
Selecting measurement modes: Material Groups, Pin, Pinless, MR12, Set Reference.
Instructions for using the internal pinless sensor for moisture detection.
Steps for conducting moisture content measurements with external pin probes.
Guide for connecting and using the optional MR12 Ball Moisture probe.
Using the Set Reference utility to establish a baseline for measurements.
Configuration and activation of the high moisture alarm feature.
Operating the thermal camera, including color palette selection.
How to use Auto/Lock temperature scaling for thermal image analysis.
Using the digital camera and overlaying measurement data.
Setting up and managing high and low IR temperature alarms.
To Next Page
