Descriptions
4
7. Mixing ratio calculation in grains per pound (GPP)
8. IR Thermal image
9. Cross-hairs (Center Spot)
10. Low end of IR image temperature range
11. High end of IR image temperature range
12. Temperature scale
13. Laser pointer active icon
14. Lamp icon appears when worklight is ON
15. USB icon appears when connected to PC or charger
16. Bluetooth® active icon
NOTE
Not all icons are represented in Figure 4–2. Other available icons are explained in their re-
spective sections of this user manual.
4.4 Sensor Extension Accessory (MR-EXT)
The MR-EXT sensor extender accessory helps protect the RH/Temperature
sensor from overheating by adding a 7.62 cm (3 inch) buffer between the me-
ter and sensor.
The MR-EXT attaches directly to the meter (where the sensor is normally at-
tached) and the sensor attaches to the other end of the extender. Refer to the
illustration below.
Figure 4.3 MR-EXT Extender Accessory
1. Extender socket: plugs into MR277.
2. Extender locking collar.
3. Turn with the arrow icon to loosen collar.
4. Alignment notch for keyed sensor socket.
5. Keyed sensor socket.
6. Sensor socket top view.
#NAS100005; r. AL/76939/76957; en-US
7
To Next Page
Loading...
