Thermal and Visible Camera Operation
8
8.4 High/Low IR Temperature Alarms
1. To access the Alarm mode use the menu (Settings/Measurement Parame-
ters/IR Temperature & Moisture Alarm).
2. Select the ‘IR Temperature Alarm’ mode.
3. Use the navigation arrows and Select button
to set the Alarm (ABOVE,
BELOW, or OFF) and to set the temperature limit. There is no beeper
available for the temperature alarms so the ‘No Sound’ setting cannot be
changed. Press Select to confirm and press Return
to exit the menu.
4. When the High or the Low Alarm is enabled, the main display will show
the alarm bell icon next to the measurement digits as shown in Figure 8–4
below.
5. When the measurement exceeds the high threshold (i.e., when ABOVE
setting is chosen), the text for the measurement reading will appear red in
color. When the measurement falls below the low threshold (when BE-
LOW setting is chosen), the text for the measurement reading will appear
blue in color.
Figure 8.4 High Temperature alarm example. Note that the reading is red in color
#NAS100005; r. AL/76939/76957; en-US
44
To Next Page
Loading...
