User Interface Menus
5
5.8 Settings Menu
The Settings menu offers the following options:
Figure 5.23 Selecting the ‘Settings’ mode from the main menu
Figure 5.24 Settings menu items
• IGM™ Custom mode: Select the readings that you wish to display when
the IGM™ Custom Mode is enabled in the Measurement Menu, Section
5.5.
Figure 5.25 IGM™ Custom mode selections. Pick the items to display in the IGM™ Cus-
tom mode
• Measurement Parameters: Use the Measurement Parameters menu to
set the Temperature Units, Emissivity factor, and IR Temperature & Mois-
ture Alarms. These are explained below:
#NAS100005; r. AL/76939/76957; en-US
19
To Next Page
Loading...
