HD Wire-Free Security System
Quick Connection Guide
www.lorextechnology.com
STEP 1: Initial Setup
* Per camera in multi-camera packs
Package Contents
LHB900_QCG_EN_R1
To prepare the cameras and receiver:
Before you begin, you will need to prepare the power packs, wire-free cameras,
and the wireless receiver.
HD Wire-Free Security Cameras
(Model Number: LWB3801)
Rechargeable
Power Pack*
Wireless
Receiver
Mounting Kit*
Power Pack
Adapter
USB Mouse Remote Control Ethernet Cable
DVR Power
Adapter
HDMI Cable
HD DVR
(Model Number: LHB906)
Camera / Receiver
Antennas*
STEP 3: Connecting with Lorex Secure
To connect with Lorex Secure:
1. Download and install the free Lorex Secure app from the
App Store or Google Play Store.
2. Tap the Lorex Secure icon to launch the app.
Connect to your system using the free Lorex Secure app for smartphones and
tablets (iOS and Android).
3. Tap SIGN UP. Enter your email address and password to create a new account.
4.
Need Help?
Visit us online for up-to-date software and complete instruction manuals.
Click on the Downloads tab
4
Visit lorextechnology.com
Search for the model number
of your product
Click on your product in the
search results
3
2
1
Tap
Security System
Tap
ADD DEVICE
5.
6. Scan the QR code on the
top of your DVR using
the camera on your
smartphone or tablet.
7. Enter your DVR’s user name (default: admin) and password (default:
00000000). Tap DONE.
8. Enter a new, secure 8-15 character password. This password will be used to
connect to your system from now on.
Record your password below and store in a secure place:
1. Insert the charged power packs into each camera base.
Push up until the power pack ‘clicks’ into place.
STEP 2: Setting Up the DVR
1. Connect the wireless receiver to
the USB port on the back panel of
the DVR.
2. Connect the DVR to your router
using the included Ethernet cable.
3. Connect the included power
adapter to the DVR. Wait a few
minutes for the system to start
up.
To set up the DVR:
Next, you must set up the DVR and connect the wireless receiver.
OPTIONAL: Full DVR Setup
• This guide describes basic setup of the DVR only.
This installation is intended for users who wish to
monitor their system using the free Lorex Secure
app on their smartphone or tablet.
• You may choose to connect the included USB
mouse and a monitor with HDMI or VGA cable (not
included) for complete control over your wire-free
security system using the DVR. See the included
Quick Reference Guide for details.
9. Your system will appear on the homescreen of the app. Tap each channel
then tap the play button (
) to stream live video.
10. Remove the power pack from each camera by lifting
up the rubber seals covering the release buttons*.
Push both release buttons then pull down on the power
pack.
HDMI VGA*OR
* Not included
NOTE: If this is not the first device on your account, log in using your email
address and password, then tap LOG IN. Tap and then Security System.
Proceed to step 6.
Copyright © 2017 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
NOTE: The receiver includes double-sided tape
and mounting screws for optional window or wall
mounting for improved line-of-sight with cameras.
ATTENTION: Place your hand underneath the power
pack when removing to prevent it from falling.
**
2. Twist the adjustment ring near the camera base
toward the unlocked position ( ) to loosen and
reposition each camera as shown to the right.
Connect one of the white antennas to each
camera.
3. Connect the two black antennas to the wireless
receiver.
NOTE: Power packs come fully charged with no need for initial charging.
English Version 1.0
GUIDE
1 / 2
Adjustment ring
* Top view
*
To Next Page
Need help?
General
