Need help?Do you have a question about the FLIR Ranger HRC MS and is the answer not in the manual?
General| Resolution | 640 x 512 |
|---|---|
| Spectral Band | Mid-Wave Infrared (MWIR) |
| Power Supply | 24 VDC |
| Environmental | IP66 |
| Field of View (H x V) | 2.3° x 1.8° |
| Lens Options | Multiple options available |
| Detection Range | Up to several kilometers (depending on lens and conditions) |
| Cooling System | Integrated cooler |
| Operating Temperature | +55°C |
| Weight | Varies depending on configuration |
| Dimensions | Varies depending on configuration |
| Interface | Ethernet |
| Video Output | Ethernet |
Provides a general introduction to the Ranger HRC MS system and its capabilities.
Essential checks to perform before powering on the system.
Safety precautions and warnings specific to the laser range finder.
Details the different cameras and sensors integrated into the system.
Describes the main hardware components of the Ranger HRC MS system.
Lists the available IR camera options for the system configurations.
Lists the available TV camera options for the system configurations.
Describes the six different operating modes of the Ranger HRC MS system.
Provides a general overview of the Joystick Control Unit (JCU) and its main parts.
Details the functions of the joystick and keypad buttons in different system modes.
Explains how system information is displayed and managed on the monitor.
Describes how to navigate and use the system software menu.
Used to manage autoscan functionality and park the system.
Manages the appearance of the image on the monitor.
Defines system constants and appearance of information indicators.
Feature used to select IR palette options like Gray, Rainbow, Iron, etc.
Feature used to select the image adjustment mode.
Defines preset autoscan speed rates for system movement.
Selects the operational mode of the joystick.
Feature used to select the system language.
Feature used to select the system date format.
Feature used to start the diagnostic test.
Feature used to set the device ID.
Displays status information for various functions when triggered.
Information from the IR Camera displayed on the monitor.
Accesses IR Camera features via the System Software.
Saves the current image to the camera's internal file system.
Opens an image from a file list in the camera's internal file system.
Controls the appearance of the IR image.
Selects language and date/time formats.
Configures system parameters like video mode and remote control.
Describes the physical mounting of system components.
Details how to connect system cables.
Explains cable connections for different system configurations.
Depends on which equipment was replaced; camera or LRF unit.
Procedure for aligning cameras using another camera as reference.
Procedures for starting up and turning off the system.
Describes basic features executable via JCU or System Software menu.
Explains features for controlling and optimizing the IR image.
Provides basic manual actions for image quality optimization.
Selects the target scene before making adjustments to optimize the image.
Adjusts the temperature range based on environmental conditions.
Performs internal calibration of the camera.
Setting the digital zoom factor to 1x for image optimization.
Controls which part of the scene is used for image adjustments.
Performs auto focus adjustment and manual tuning.
Recommends adjustment modes for different contrast scenes.
Controls DDE impact for detail enhancement and noise reduction.
Instructions for cleaning the camera body, cables, and accessories.
Guidance on cleaning the camera lenses.
Contact information for technical support and service inquiries.
Detailed technical specifications for the Ranger HRC MS system.
Lists part numbers and descriptions for system components and cables.
Provides a general overview of system connectors and their types.
Guide for identifying and resolving common operational faults.
Information on configuring the system for IP network operation.
Introduces the subject of infrared radiation and thermal imaging.
Explains the division of the electromagnetic spectrum into wavelength regions.
To Next Page
