FLIR Ranger HRC MS - Color scale; Level;Span

Ranger HRC™ operator´s manual – System software
62 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Setup – Image dialog box
Feature Description
Color scale The Color scale feature is used to select IR palette:
• Gray
• Gray inv (inverted)
• Rainbow
• Rainbow inv (inverted)
• Iron
• Iron inv (inverted)
• Rainbow HC
• Rainbow HC inv (inverted)
Level/Span The Level/Span feature is used to select adjustment mode.
• Manual: Manual adjustment of level and span.
• Auto (linear): Automatic adjustment of level and span, with Color
Distribution in Linear mode.
• Auto (full): Automatic adjustment of level and span, with Color
Distribution in Histogram mode.
• DDE (linear): Automatic adjustment of level and span, with Digital Detail
Enhancement and Color Distribution in Linear mode.
• DDE (full): Automatic adjustment of level and span, with Digital Detail
Enhancement and Color Distribution in Histogram mode.
Nuc button The Nuc button feature is used to change the operational mode of the NUC
button on the JCU.
• NUC/AF (this is the default setting):
Press button NUC < 1 second to perform an Internal NUC
Press button NUC > 1 second, to perform a on-shot auto focus adjust-
ment
and
Press buttons FCN + NUC < 1 second to perform an External NUC.
Press buttons FCN + NUC > 1 second to go to the xed focus position.
and
Press the C + NUC buttons < 1 second to perform an External NUC
against the scene.
Press the C + NUC buttons > 1 second to perform a one-shot auto focus
adjustment.