FLIR Ranger HRC MS - System

Ranger HRC™ operator´s manual – IR Camera software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 99
8.3.3.6 System
Figure 8.10 System Setup dialog box.
Menu choice Possible choices Explanation
Video mode • NTSC
•
PAL
Use the navigation pad to select the video mode.
Press the ENTER button to conrm.
NOTE: The change will take effect and the
graphical user interface will be restarted
when pressing the ENTER button.
Video color • On
• Off
• Auto
Us the navigation pad to select video color
should be enabled, disabled or set to Auto. If
Auto is selected, the camera will automatically
enable video color if a color palette is active.
Press the ENTER button to conrm.
Remote
control
• 500
• Sentry
Use the navigation pad to select the remote
control model.
Press the ENTER button to conrm.
For more information on using the Sentry JCU,
contact FLIR Systems.
8.3.3.7 Network
Figure 8.11 Network Setup dialog box.
This dialog box species the IP Address, Net Mask and Gateway and
affects how the camera works in a network.