FLIR Ranger HRC MS - Turning off the System

Ranger HRC™ operator´s manual – System operation
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 135
Figure 11.1 Test pattern.
11.1.2 Turning off the system
Turning off the system
Step Action
1 Press the PRK button > 1 second to send the system to the mechanical home position.
The system settings will automatically be saved.
NOTE: Do not turn off the system while “Saving” is displayed on the monitor.
2 Verify that the lens cover is closed. If not, close it manually with the handle on top of the
camera.
3 Turn off the system with the ON/OFF switch on the Power Box or Power Supply unit.