Ranger HRC™ operator´s manual – System description
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 7
3.2 System components
In addition to the cameras and sensors, the system includes components
for pan/tilt, signal distribution, power supply, etc.
For part numbers of the cables, please refer to the Parts list in section
15.2. For an overview of the location of the connectors, see section 15.4.
3.2.1 Pan/Tilt
The Pan/Tilt unit is a rugged two axis pan and tilt mechanism. The Pan/
Tilt unit is equipped with a left and a right mounting plate, where the IR
and TV and cameras are mounted. On top of the Pan/Tilt unit, there is a
housing for the LRF, DMC and GPS units.
1
2
3
4
5
6
Figure 3.1 Pan/Tilt connections.
To Next Page
Loading...
