Ranger HRC™ operator´s manual – Technical appendices
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008  207
15.5.3.5  J8 – 10-pin connector
NOTE: Pin designations are printed on connector.
Pin Signal name Wire type
A 5 V pull-up
B 28 VDC AWG 20
C Screen connec
D GND
E Terminator disable
F RXPOS_HOSTUP
G RXNEG_HOSTUP
H TXPOS_HOSTUP
J TXNEG_HOSTUP
K Signal GND
15.5.3.6  J9 – 23-pin connector
NOTE: Pin designations are printed on copnnector.
Pin Signal name Wire type
A Reserved
B Reserved
C TV Video negative Coax 75 Ω
D TV Video positive Coax 75 Ω
E Terminator disable AWG 26
F RS485CONSRX_A AWG 26 twisted pair
G RS485CONSRX_B AWG 26 twisted pair
H RS485CONSTX_A AWG 26 twisted pair
J RS485CONSTX_B AWG 26 twisted pair
K RS485HOSTRX_A AWG 26 twisted pair