FLIR Ranger HRC MS - Basic features

Ranger HRC™ operator´s manual – Basic settings
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 127
NUC button setting
Step Action
3 Select Nuc button.
4 Use the LEFT/RIGHT navigation buttons to select the desired NUC button setting;
NUC/AF or AF/NUC.
5 Press the ENTER button to conrm and to exit MENU mode.
10.2.3 Joystick polarity
The joystick has two operational modes:
Normal: When the operator moves the joystick towards himself, the
Pan/Tilt unit will move downwards.
Pilot: When the operator moves the joystick away from himself, the
Pan/Tilt unit will move downwards.
The Joystick polarity feature is used to select the operational mode of the
joystick.
Joystick setting
Step Action
1 Press the ENTER button to enter MENU mode.
2 Select Pan-Tilt …from the Setup menu and press the ENTER button. The Setup – Pan/
Tilt dialog box is displayed.
3 Select Joystick polarity.
4 Use the LEFT/RIGHT navigation buttons to select the desired NUC button setting;
Normal or Pilot.
5 Press the ENTER button to conrm and to exit MENU mode.