FLIR Ranger HRC MS - Test Image; System Restart

Ranger HRC™ operator´s manual – IR Camera software
104 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
8.3.4.7 Test image
To display an image test pattern, select Test image and press the ENTER
button. You can use this image test pattern to calibrate your video moni-
tor or computer screen.
Depending on the settings in the System Setup dialog box, this image
test pattern will be displayed as a grayscale image or a color image.
8.3.4.8 System restart
To restart the camera system, select System restart and press the
ENTER button.