FLIR Ranger HRC MS - Setup -Symbology

Ranger HRC™ operator´s manual – System software
64 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
7.6.1.2 Setup –Symbology
The Setup – Symbology dialog box is used to dene how the overlaid
symbology (system information indicators) is displayed on the monitor.
The Setup – Symbology dialog box is the same for IR and TV, except for
the FOV brackets and Scan points features which are not available when
TV is selected.
Figure 7.19 Setup – Symbology dialog box when IR is selected.
Setup – Symbology dialog box
Feature Description
Data eld The Data eld feature is used to control the appearance of the two lines of
system information that is presented at the bottom of the monitor.
• Normal: Both lines of information are shown.
• Reduced: Only the bottom line of information is shown; that is, date, time
and digital azimuth and elevation.
• None: Both lines are hidden.
Data background The Data background feature is used to control the appearance of the
background of the two lines of system information that is presented at the
bottom of the monitor.
• Solid: Puts a solid background behind the two lines of information, which
makes them more visible.
• Transparent: No background behind the two lines of information.