Ranger HRC™ operator´s manual – Hardware installation
108 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
9.2 Cable connections
Always ensure that the system is disconnected from the AC power before
connecting or disconnecting any cables.
The connectors shall be sealed with protective caps when not in use.
For connections with bayonet sockets, the connector shall be fastened un-
til it is locked a click sound is heard).
For sockets with a color marking, the connectors shall be fastened until
the marking is no longer visible, see Figure 9.4.
Correct (red marking not visible) Incorrect
Figure 9.4 Socket with color marking
NOTE: When multiple part numbers are indicated in the tables below, please refer to the
Parts list in section 15.2 for more information.
To Next Page
Loading...
