Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 3
2
General Safety Warnings
Before switching the power ON make sure that:
• All connectors are fastened properly
• All personnel is in a safe distance from moving parts
• The Pan/Tilt is free from obstacles
Before starting work on system components:
• Turn power off and disconnect the system cable before starting work
on any system components.
• The operator must press the PRK button (on JCU Keypad) for more
than 3 seconds to manually enable the pan/tilt.
When using a Laser:
• When using a system equipped with the optional Laser, be sure and
read the Laser Warning Label (sample below).
• Do not open the Laser – Danger of high voltage electrical shock.
• Do not aim the Laser at highly reective objects or surfaces
windows, mirrors or reective sign boards) within a radius of
<100 m since the powerful laser reection will damage the laser’s
sensitive detector.
INVISIBLE LASER RADIATION
DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS
LASER, CLASS 3A (EN 60825-1; 1994)
12 mJ maximal output energy at 1540 nm
25 ns pulse width
To Next Page
Loading...
