Ranger HRC™ operator´s manual – System description
14 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
3.2.5 Power Box
The Power Box is the Junction Box and the Power Supply unit integrated
in a 19” case.
Figure 3.6 Power Box connections.
Power Box connections
Callout Description
1 Host cable
The Host cable is used when the system is controlled from an external computer.
The Host cable is connected to the J8 connector on the Power Box.
2 Video cable
The Video cable is connected to the J7 connector on the Power Box and to an external
video monitor.
NOTE: The J7 connector corresponds to the VIDEO 1 connector (J3) on the
JPC2 unit.
3 System cable
The System cable is connected to the J5 connector on the Power Box and to the JCU
connector (J1) on the JPC2 unit.
4 JCU cable
The JCU cable is connected to the J9 connector on the Power Box and to the J10
connector on the Joystick Control Unit (JCU).
To Next Page
Loading...
