Ranger HRC™ operator´s manual – System description
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 15
Power Box connections
Callout Description
5 Video cable
The Video cable is connected to the J6 connector on the Power Box and to an external
video monitor.
NOTE: The J6 connector corresponds to the VIDEO 2 connector (J11) on the
JPC2 unit.
6 AC Mains cable
The AC Mains cable is connected to the power inlet on the Power Box and to the AC
mains supply.
The Power cable is shipped either with a European or a US standard AC power plug.
NOTE: The three power outlets can be used to connect for instance the video
monitors and other equipment.
To Next Page
Loading...
