Ranger HRC™ operator´s manual – IR Camera software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 85
8.2 IR Camera menu system
The IR Camera menu system gives access to the features of the IR Cam-
era. The IR Camera menu system is opened from the System Software,
with the IR menu feature in the Setup menu. When the IR menu feature
is selected, a menu bar with the currently selected IR Camera menu and
feature highlighted is displayed.
Features that directly perform an action are displayed as a command, for
example NUC. Features that open up a dialog box are displayed with three
dots after the feature title, for example Zoom…. Features that currently
are disabled and not available for selection are shaded in the menu.
The Joystick Control Unit JCU) is used to navigate in the IR Camera
menu system and to execute actions, see chapter 6.
The CANCEL button is used to exit the IR Camera menu system. If not in
use for a while, the IR Camera menu system is automatically exited.
To Next Page
Loading...
