FLIR Ranger HRC MS - Graphical User Interface (GUI)

Ranger HRC™ operator´s manual – IR Camera software
94 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Menu choice Possible choices Explanation
Adjust area • A1
• A2
• A3
• A4
• A5
Press the ENTER button and use the navigation
pad to select what area the camera should use
when adjusting the image with regards to level
and span.
Focus area • A1
• A2
• A3
Press the ENTER button and use the navigation
pad to select what area the camera should use
when focusing.
8.3.3.2 Graphical User Interface (GUI)
Figure 8.6 GUI Setup dialog box.
NOTE: Hide graphics is the factors default setting.