FLIR Ranger HRC MS - Page 105

Ranger HRC™ operator´s manual – IR Camera software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 95
Menu choice Possible choices Explanation
Center position • On
• Off
Use the navigation pad to display or hide the
optical center position crosshair.
Press the ENTER button to conrm.
Focus position • On
• Off
Use the navigation pad to display or hide the
focus position indicator.
Press the ENTER button to conrm.
Dynamic range • On
• Off
Use the navigation pad to display or hide the
dynamic range indicator.
Press the ENTER button to conrm
Upper status • On
• Off
Use the navigation pad to display or hide the
top status line.
Press the ENTER button to conrm.
Clock • On
• Off
Use the navigation pad to display or hide the
bottom status line.
Press the ENTER button to conrm.
Temp range • On
• Off
Use the navigation pad to display or hide the
bottom status line.
Press the ENTER button to conrm.
FLIR logo • On
• Off
Use the navigation pad to display or hide the
bottom status line.
Press the ENTER button to conrm.
Calib cross • On
• Off
Use the navigation pad to display or hide a
calibration crosshair in the image.
Press the ENTER button to conrm.
X offset – Use the navigation pad to move the calibra-
tion cross along the X axis. The number
indicates the number of overlay pixels (640
x 480) and is calculated from the center of
the screen.
Press the ENTER button to conrm.
Y offset – Use the navigation pad to move the
calibration crosshair in Y axis. The number
indicates the number of overlay pixels (640
x 480) and is calculated from the center of
the screen.
Press the ENTER button to conrm.