FLIR Ranger HRC MS - BIT Result; BIT Start

Ranger HRC™ operator´s manual – IR Camera software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 103
8.3.4.5 BIT result
Figure 8.16 BIT result log.
When you select BIT Start, the camera performs a number of built-in
tests. This log le displays the results of those tests.
8.3.4.6 BIT start
Figure 8.17 Start BIT dialog box.
Select BIT start and then press OK to make the camera perform a num-
ber of built-in tests BIT). The results of these tests will be displayed in
the BIT result log le.