Ranger HRC™ operator´s manual – Optimizing the IR Image
178 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Selecting Adjustment mode
Step Action
1 Select Setup/IR menu to open the IR Camera menu system.
2 Select Setup/Image…/Adjust mode.
3 Use the LEFT/RIGHT navigation buttons to select adjustment mode.
4 Press the ENTER button to conrm.
5 Press the CANCEL button to exit the IR Camera menu system.
Figure 12.9 Top line status indicator
Top line status indicator 4 indicates the selected mode (AUTO L, AUTO,
MANUAL or DDE).
12.2.7 Adjust image
Adjust image is a feature that allows manual adjustments of the image
with regards to level and span, or the corresponding brightness and cont-
rast.
The appearance of the dialog box depends on the selected adjustment
mode.
In Auto and DDE mode, the symbol * appears in the top line status bar,
indicating that manual adjustments have been made: AUTO* and DDE*.
NOTE: The manual settings are a matter of personal taste, and may vary from scene to
scene. Test different settings and see how the quality of the image changes.
To Next Page
Loading...
