FLIR Ranger HRC MS - Image Menu When TV Is Selected

Ranger HRC™ operator´s manual – System software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 59
7.5.2 Image menu when TV is selected
Figure 7.15 Image menu when TV is selected.
NOTE: For features with on/off alternatives, the displayed feature (for example Power off)
is the action that will be performed if the feature is selected, and not the current status.
For example,
Power off means that the power is currently On and that it will be turned Off
if the feature is selected.
Image menu when TV is selected
Feature Description
Declutter The Declutter feature is used to temporarily remove the system information
from the monitor. When the ENTER button is pressed, the system informa
-
tion is shown again.
Auto focus The Auto focus feature is used to execute a one-shot auto focus adjustment.
(Continuous auto focus is not provided, because of the risk for mechanical
wear.)
NOTE: The Auto focus feature is not supported by all TV cameras.
If not supported, the
Auto focus feature is disabled in the Image
menu.
Change FoV The Change FoV feature is used to move the system to the next preset eld-
of-view (FOV).
NOTE: The available preset elds-of-view for the TV camera are the
same as for the IR camera (if supported by the TV camera).