FLIR Ranger HRC MS User Manual

Ranger HRC™ operator´s manual – Optimizing the IR Image
158 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Figure 12.3 IR Camera top line status indicator.
At the starting point, the top line status indicator 1 Filter type) shall be
OFF and indicator 3 Digital zoom factor) shall be blank.
12.1.1.2 Filter Off
Filter is a function that reduces the noise visible in the image in low cont-
rast scenes. The Filter shall normally be set to OFF. For low contrast sce-
nes, see section 12.3.
When the Filter is OFF, the top line status indicator number 1 displays
OFF.
Setting Filter OFF
Step Action
1 Press the ENTER button to enter MENU mode.
2 Select IR menu from the Setup menu and press the ENTER button. The menu system of
the IR Camera is opened.
3 Select Setup and press the ENTER button.
4 Select Image… and press the ENTER button. The Image Setup dialog box is displayed.
5 Select Filter.
6 Use the LEFT/RIGHT navigation buttons to select Off.
7 Press the ENTER button to conrm.
8 Press the CANCEL button to exit the IR Camera menu system.

FLIR Ranger HRC MS Specifications

General

Brand	FLIR
Model	Ranger HRC MS
Category	Security System
Language	English