7.6.2.1 Setup – Image
The Setup – Image dialog box is used to control the appearance of the TV
image.
NOTE: The features in the Setup – Dialog box are not supported by all TV cameras.
Figure 7.32 Setup – Image dialog box when TV is selected.
Setup – Image dialog box
Feature Description
Back light comp The Back light comp feature is used to turn on/off the backlight.
• Off: Turns off the backlight.
• On: Turns on the backlight compensation. If an object appears in front of
a very light background – or if the object is very dark – the backlight will
increase the image quality.
Image effect The Image effect feature is used to select Color or Black/White mode.
• Off: Puts the TV camera in Color mode.
• B/W: Puts the TV camera in Black/White mode.
Near IR sensitive The Near IR sensitive feature is used to increase the sensitivity to IR radia-
tion by disabling a built-in cut-off IR radiation lter. The feature is especially
valuable under twilight conditions.
• Off: Deactivates the Near IR sensitive feature.
• On: Activates the Near IR sensitive feature.
7.6.2.2 Setup – Symbology
The features of the Setup – Symbology dialog box when TV is selected are
the same as when IR is selected, see section 7.6.1.2, but the FOV brackets
and Autoscan point number indicators are not visible when TV is selec-
ted.
To Next Page
Loading...
