190 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
13
Maintenance and cleaning
13.1 Camera body, cables & accessories
The camera body, cables and accessories may be cleaned by wiping with a
soft cloth. To remove stains, wipe with a soft cloth moistened with a mild
detergent solution and wrung dry, then wipe with a dry soft cloth.
NOTE: Do not use benzene, thinner, or any other chemical product on the camera, the
cables or the accessories, as this may cause deterioration.
13.2 Lenses
In order to make the system withstand severe eld conditions, all lenses
are coated with a hard carbon thin lm coating.
To clean the lenses, any consumer-grade glass cleaner can be used.
13.3 Storage
The system shall be stored in a temperature intervall of -40° – +70°C and
within a immidity intervall of < 55% RH.
13.4 Preventive Maintenance
System must be turned on every 12 month for at least one hour.
To Next Page
Loading...
