FLIR Ranger HRC MS - 12.2.11 Palette; 12.2.11.1 Select Palette; 12.2.11.2 Invert Palette

Ranger HRC™ operator´s manual – Optimizing the IR Image
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 183
12.2.11 Palette
There are four different IR palettes:
Rainbow
Rainbow HC
Gray
Iron
12.2.11.1 Select palette
The default IR palette is Gray. Changing the palette from Gray to Rain-
bow may improve the perception of details in low contrast scenes. Please
refer to section 12.3.
Selecting Palette
Step Action
1 Select Setup/IR menu to open the IR Camera menu system.
2 Select Image/Palette….
3 Use the LEFT/RIGHT navigation buttons to select Rainbow, Rainbow HC, Gray or Iron.
4 Press the ENTER button to conrm.
5 Press the CANCEL button to exit the IR Camera menu system.
12.2.11.2 Invert Palette
All IR palettes are possible to invert. With the Gray palette for example,
white or black can be set to represent hot whitehot is default). Inverting
the palette may have an effect on how the image is perceived.
Inverting Palette
Step Action
1 Press button INV to toggle between White hot and Black hot IR palette.