FLIR Ranger HRC MS - NUC Button

Ranger HRC™ operator´s manual – Basic settings
126 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
10.2.2 NUC button
The NUC button has two operational modes:
NUC/AF (this is the default setting):
Press button NUC < 1 second to perform an Internal NUC.
Press button NUC > 1 second to perform a one-shot auto focus
adjustment.
and
Press buttons FCN + NUC < 1 second to perform an External NUC
against the lens cover.
Press buttons FCN + NUC > 1 second to go to the x focus position.
and
Press the C + NUC buttons < 1 second to perform an External NUC
against the scene.
Press the C + NUC buttons > 1 second to perform a one-shot auto
focus adjustment.
AF/NUC:
Press button NUC < 1 second to perform a one-shot auto focus ad-
justment.
Press button NUC > 1 second to perform an Internal NUC.
and
Press buttons FCN + NUC < 1 second to go to the x focus position.
Press buttons FCN + NUC > 1 second to perform an External NUC
against the lens cover.
and
Press the C + NUC buttons < 1 second to perform a one-shot auto
focus adjustment.
Press the C + NUC buttons > 1 second to perform an External NUC
against the scene.
The Nuc button feature is used to select the operational mode of the NUC
button.
NUC button setting
Step Action
1 Press the ENTER button to enter MENU mode.
2 Select Image …from the Setup menu and press the ENTER button. The Setup – Image
dialog box is displayed.