FLIR Ranger HRC MS - Setup - Date & Time

Ranger HRC™ operator´s manual – System software
70 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
7.6.1.5 Setup – Date & time
The Setup – Date & time dialog box is used to set the system date and
time.
The Setup – Date & time dialog box is the same for IR and TV.
Figure 7.23 Setup – Date & time dialog box.
Setup – Date & time dialog box
Feature Description
Year The Year feature is used to set the year:
• 2003-2038
Month The Month feature is use to set the month:
• 01-12
Day The Day feature is use to set the day:
• 01-31
Hour The Hour feature is used to set the hour. The Hour format depends on the
settings made in the Setup – Local Adapt dialog box, see section 7.6.1.4.
• 12 hour format:
12 AM-12 PM
• 24 hour format:
01-24
Minute The Minute feature is used to set the minute:
• 00-59
NOTE: The seconds are set to 00 when the ENTER button is pressed to conrm the
settings in the
Setup – Date & time dialog box.