Ranger HRC™ operator´s manual – Optimizing the IR Image
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 167
Selecting Color Distribution mode
Step Action
1 Press the ENTER button to enter MENU mode.
2 Select IR menu from the Setup menu and press the ENTER button. The menu system
of the IR Camera is opened.
3 Select Setup and press the ENTER button.
4 Select Image… and press the ENTER button. The Image Setup dialog box is displayed.
5 Select Color distribution.
6 Use the LEFT/RIGHT navigation buttons to select Histogram or Linear.
7 Press the ENTER button to conrm.
8 Press the CANCEL button to exit the IR Camera menu system.
Figure 12.7 Top line status indicator.
Top line status indicator 5 indicates the selected color distribution mode
(LIN or HIST).
12.1.7 Save settings
The Save settings feature saves the current IR Camera settings, for ex-
ample Adjustment mode and Color distribution. The saved settings will
be loaded when the system is switched on next time.
NOTE: The IR Camera settings are not saved when the PRK button is pressed.
To Next Page
Loading...
