Ranger HRC™ operator´s manual – Joystick Control Unit
40 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
6.2.5 MENU mode
The MENU mode is entered by pressing the ENTER button in NORMAL
or PARK mode.
In MENU mode, certain keypad buttons are used to navigate in the Sys-
tem Software menu system. The other buttons are disabled and are not
included in the table below.
JCU joystick and keypad – MENU mode
Feature Description
ENTER
Use the ENTER button to:
• enter the MENU mode
• open the dialog box of the highlighted feature
• activate the highlighted feature and exit MENU mode
C
CANCEL
Use the CANCEL button to:
• exit the active dialog box
• exit MENU mode without changing the current menu settings
UP
DOWN
Use the UP/DOWN navigation buttons to navigate up/down in menus and dialog
boxes.
LEFT
RIGHT
Use the LEFT/RIGHT navigation buttons to:
• navigate left/right in the Main menu
• display different dialog box options
• change values in dialog boxes
NOTE: Hold down the LEFT/RIGHT button for a while to decrease/increase a
value with larger increments.
FCN The FCN button is used in some dialog boxes to enable certain actions.
To Next Page
Loading...
