FLIR Ranger HRC MS - Power Box Configuration

Ranger HRC™ operator´s manual – Hardware installation
114 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
9.2.2.3 Power Box conguration
With this conguration, the Power Box is used for connections of the JCU
and monitors. The system is controlled and powered via the single Sys-
tem Cable, connected to the JPC2 unit. The Power Box has integrated
power supply functionality.
Figure 9.8 Power Box conguration.
1
2
3
4
5
6