Ranger HRC™ operator´s manual – Hardware installation
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 115
Power Box conguration
Callout Denomination Part number Connections
1 AC Mains cable - From AC mains supply to power
inlet on Power Box.
2 Video cable 908 929 From J7 connector on Power Box
to monitor.
NOTE: If only one monitor is used, it shall be con-
nected to the J7 connector.
3 Video cable 908 929 From J6 connector on Power Box
to monitor.
4 JCU cable 194 612 From J9 connector on Power Box
to J10 connector on JCU.
5 System cable 1 196 215
614 006 015
From J5 connector on Power Box
to JCU connector (J1) on JPC2.
6 Host cable 614 005 140
194 638
From J8 connector on Power Box
to external computer.
To Next Page
Loading...
