IR Camera information
Callout Description
1 Top line status indicator: OFF, LO or HI (current noise lter)
2 Top line status indicator: FOV xx.x (current eld of view angle)
3 Top line status indicator: X2, X4 or X1 (zoom indicator; ‘X1’ will not be displayed)
4 Top line status indicator:
• AUTO = automatic adjustment mode
• AUTO* = contrast (span) and/or brightness (level) adjusted with an offset of ± 50 %
• AUTO L = automatic level adjustment mode
• AUTO L* = brightness (level) adjusted with an offset of ± 50 %
• MANUAL = manual adjustment mode
• FREEZE = image freezed mode
• RECALL = image recalled mode
5 Top line status indicator: HIST, LIN (histogram or linear color distribution mode)
6
Top line status indicator: WHITE or BLACK (polarity selection, i.e. white = hot or
black = hot)
7 Focus position indicator. Indicates the present focus position. Focusing against innity
result in indicator arrow moving towards the right side.
8 Alert indicator. The indicator is displayed when some kind of system failure has occur-
red. The camera is operating with reduced functionality.
9 Defroster indicator. The indicator is displayed when the defroster (frontlens heater) is
active.
10 Dynamic range indicator. The dynamic range indicator shows the dynamic range of the
current image in relation to the calibrated range. The position of the bar indicates the
level, while the width of the bar indicates the span.
11 Calibration crosshair. User adjustable crosshair.
12 Center position crosshair. Indicates the center of the optical axis.
13 Bottom line status indicator: Present date and time
14 Range
15 Logo type on
To Next Page
Loading...
