Ranger HRC™ operator´s manual – System software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 65
Setup – Symbology dialog box
Feature Description
Status background The Status background feature is used to control the appearance of the
background of the status text, which is displayed in the upper left corner
when the functions they represent are trigged.
• Solid: Puts a solid background behind the additional system information,
which makes them more visible.
• Transparent: No background behind the additional system information.
Pos indicator The Pos indicator feature is used to control the appearance of the analog
azimuth and elevation indicators.
• On: The analog azimuth and elevation indicators are always shown.
• Off: The analog azimuth and elevation indicators are always hidden.
• When changed: The analog azimuth and elevation indicators are only
shown when the position of the system is changed.
Focus indicator The Focus indicator feature is used to control the appearance of the focus
position indicator.
• On: The focus position indicator is always shown.
• Off: The focus position indicator is always hidden.
• When changed: The focus position indicator is only shown when the
focus is changed.
Crosshair retic The Crosshair retic feature is used to control the appearance of the crosshair
reticle indicator.
• On: The crosshair reticle indicator is shown.
• Off: The crosshair reticle indicator is hidden.
FOV brackets The FOV brackets feature is used to control the appearance of the FOV
brackets indicator.
• On: The FOV brackets indicator is shown. (When the next FOV is the
widest FOV, no
FOV brackets are shown.)
• Off: The FOV brackets indicator is hidden.
Scan points The Scan points feature is used to control the appearance of the Autoscan
point number indicator.
• Digits on: The autoscan point number (digit) and the targeting square are
shown.
• On: Only the targeting square is shown.
• Off: No autoscan point information is shown.
Adjust GUI size The Adjust GUI size feature is used to adjust the size of the area where
the system software graphics (system information and menu system) is
displayed on the monitor.
• Yes: Opens the Setup – GUI size dialog box, see section 7.6.1.2.1.
• No: No action.
To Next Page
Loading...
