EasyManua.ls Logo

FLIR Ranger HRC MS - Page 18

FLIR Ranger HRC MS
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ranger HRC™ operator´s manual – System description
8 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Pan/Tilt connections
Callout Description
1 TV camera cable
The TV Camera cable is connected to the X3 connector on the Pan/Tilt unit and to the
TV Camera.
2 IR camera cable
The IR Camera cable is connected to the X2 connector on the Pan/Tilt unit and to the
IR Camera.
3 GPS antenna cable
The GPS antenna cable is connected to the X4 connector on the Pan/Tilt unit and to
the GPS unit.
4 DMC cable
The DMC is connected to the X5 connector on the Pan/Tilt unit and to the DMC unit.
5 LRF cable
The LRF cable is connected to the X6 connector on the Pan/Tilt unit and to the LRF
unit.
6 System cable
The System cable is connected to the X1 connector on the Pan/Tilt unit and to the
PTH connector (J15) on the JPC2 unit.

Table of Contents

Related product manuals