Ranger HRC™ operator´s manual – System software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 75
7.6.1.6.2 New password
The New password dialog box is used to set a password.
Figure 5.27 New password dialog box.
7.6.1.6.3 Change password
The Change password dialog box is used to change an existing pass-
word.
Figure 7.28 Change password.
7.6.1.6.4 Detect devices
The Detect devices dialog box is used to start a check for system changes.
If a change is found, the system will automatically make necessary
adjustments.
Figure 7.29 Detect devices dialog box.
To Next Page
Loading...
