Ranger HRC™ operator´s manual – System software
74 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
7.6.1.6.1 Enter password
The Enter password dialog box appears before the Setup – Maintenance
dialog box is opened, if a password other than the default system value
0000 has been set.
Figure 7.25 Enter password dialog box.
Enter password dialog box
Feature Description
Enter password The Enter password feature is used to enter the password.
If the CANCEL button is pressed, the Setup – Maintenance dialog box
will be displayed with most features disabled.
Figure 7.26 Setup – Maintenance dialog box with disabled features.
To Next Page
Loading...
