Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Legal disclaimer
All products manufactured by FLIR Systems are warranted against defective materials and workmanship
for a period of one (1) year from the delivery date of the original purchase, provided such products have
been under normal storage, use and service, and in accordance with FLIR Systems instruction.
All products not manufactured by FLIR Systems included in systems delivered by FLIR Systems to the
original purchaser carry the warranty, if any, of the particular supplier only and FLIR Systems has no
responsibility whatsoever for such products.
The warranty extends only to the original purchaser and is not transferable. It is not applicable to any
product which has been subjected to misuse, neglect, accident or abnormal conditions of operation.
Expendable parts are excluded from the warranty.
In the case of a defect in a product covered by this warranty the product must not be further used in order
to prevent additional damage. The purchaser shall promptly report any defect to FLIR Systems or this
warranty will not apply.
FLIR Systems will, at its option, repair or replace any such defective product free of charge if, upon
inspection, it proves to be defective in material or workmanship and provided that it is returned to FLIR
Systems within the said one-year period.
FLIR Systems has no other obligation or liability for defects than those set forth above.
No other warranty is expressed or implied. FLIR Systems specically disclaims the implied warranties of
merchantability and tness for a particular purpose.
FLIR Systems shall not be liable for any direct, indirect, special, incidental or consequential loss or dam-
age, whether based on contract, tort or any other legal theory.
Copyright
© FLIR Systems, 2008 All rights reserved worldwide. No parts of the software including source code
may be reproduced, transmitted, transcribed or translated into any language or computer language in
any form or by any means, electronic, magnetic, optical, manual or otherwise, without the prior written
permission of FLIR Systems.
This manual must not, in whole or part, be copied, photocopied, reproduced, translated or transmitted to
any electronic medium or machine readable form without prior consent, in writing, from FLIR Systems.
Names and marks appearing on the products herein are either registered trademarks or trademarks of
FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company names referenced
herein are used for identication only and are the property of their respective owners.
Quality assurance
The Quality Management System under which these products are developed and manufactured has
been certied in accordance with the ISO 9001 standard.
FLIR Systems is committed to a policy of continuous development; therefore we reserve the right to make
changes and improvements on any of the products described in this manual without prior notice.
Patents
This product is protected by patents, design patents, patents pending, or design patents pending
Contact details
Postal address FLIR Systems AB Sweden • P. O. Box 3 • SE-182 11 Danderyd • Sweden
Telephone +46 (0)8 753 25 00
Telefax +46 (0)8 731 05 30
Web site www.ir.com
E-mail imagingsweden.sales@ir.se
For contact details for regional ofces, see the back cover of this manual.
iv
To Next Page
Loading...
Need help?
General
