910-0001-00-MAN-R06 FLIR Proprietary Information Page 45 of 81
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
Figure 31 - Radar PPI (Snapshot) Mode
2.2.6.3 Refresh Radar PPI
The Refresh Radar PPI command is used in conjunction with the radar PPI (snapshot) mode to refresh
the map-like picture overlay at desired time intervals. Each time a PPI update is required, the operator
should select this command.
To Next Page
Loading...
