FLIR SC2500 User Manual

Advanced Thermal Solutions SC2500 User Manual
DCO65U-E SC2500 User Manual Page 29
video monitor remain black?
No The problem is solved.
YesContact FLIR Systems After Sales
Service
No Live image in Altair
Is the camera correctly connected and powered?
No remake connections
Yes Does Cirrus communicate with the
camera?
No Contact FLIR Systems After Sales
Service
Yes Check that external trigger is
deactivated. Is the problem solved?
No Contact FLIR Systems After Sales
Service
No image in external
triggering mode
Is the sync signal that is connected to the
camera LVTTL (0 – 3.3V) under 50 Ohms ?
No Adjust the input signal
Yes Is the frequency of the signal in the
range of the camera (from 3Hz to the MAX
frequency proposed by CIRRUS/ALTAIR)
No Adjust the frequency of the signal
YesReplace the external signal by a signal
given by a function generator setup to
square signal from 0 to 3.3V under
50Ohms and 25Hz. Do you get an
image ?
NoContact FLIR Systems After Sales
Service
YesCheck more precisely your
synchronization signal. Eg. : 50 HZ
noise, low voltage under 50 Ohms,
Rising time to long, etc.

FLIR SC2500 Specifications

General

Brand	FLIR
Model	SC2500
Category	Thermal cameras
Language	English