FLIR scout III User Manual

11
USER MANUAL - Rev 1
FLIR
SCOUT
®
III
SECTION 5. MAINTENANCE
5.1 SOFTWARE UPDATE
Software updates for your FLIR SCOUT III can be found at
www.ir.com/hunting-outdoor/ under the “Resources” tab.
5.5 CAUTIONS
• Do not disassemble the monocular enclosure. Disassembly can cause
permanent damage. The battery is not user-replaceable
• Do not point the monocular at high-intensity radiation sources, such
as the sun, lasers, or arc welders
• Do not leave ngerprints on the monocular’s infrared optics. Clean
only with low pressure fresh water and a lens cloth
• All service must be provided by the manufacturer
5.2 BATTERY SERVICE AND REPLACEMENT
If the battery will not hold a charge and requires replacement, please
contact FLIR Systems for details on returning the unit for service.
For instructions on charging the battery refer to Section 2.3 Charging
the system.
5.3 CLEANING THE SCOUT III
Wipe the housing with a damp cloth, as needed. Use a high quality
lens wipe to remove dirt or smudges from the lens and display
window. Do not use abrasives or solvents to clean the housing, lens,
or display window.
5.4 WARRANTY INFORMATION
Get detailed warranty information on your SCOUT III by visiting: www.
ir.com/scout/warranty
1.888.610.7664 info@FLIR-Direct.com
FLIR-DIRECT.com

FLIR scout III Specifications

General

Brand	FLIR
Model	scout III
Category	Binoculars
Language	English