FLIR TG165-X Quick Start

Figure 4 Laser Safety Label
Figure 5 Type-K Thermocouple
EN-US English
QUICK STEPS
1. Register to activate the 2–10 year warranty extension (see Fig-
ure 3, QR Code, in the Illustrations section).
2. Long press the Power button to switch ON or OFF.
3. Scan a test area using the default MSX® image mode (thermal
plus visible image).
4. Use cross-hairs and laser for targeting. The laser’s circular tar-
get identifies test spots. See temperature reading on the display.
5. To use visible image mode only, see Image Adjustments menu.
6. Slide the high temperature lever (TG297) to the right to measure
> 400℃ (752℉).
7. Pull the trigger to capture images.
CAMERA PARTS
See Figure 1, Camera Parts, in the Illustrations section.
1. Display area
2. Return button (back up in the menu system)
3. Laser pointer button
4. Up/Down & Power (long press)/Menu (short press) buttons
5. Lanyard post
6. Accessory mount
7. High temperature lever (TG297) for use > 400℃ (752℉)
8. Lepton® IR camera
9. Laser pointer
10. USB-C and Type-K (TG267) jack compartment
11. Spot thermal sensor
12. Flashlight (LED)
13. 2M pixel visible spectrum digital camera
14. Image capture and menu exit trigger
#NAS100021; r. AD/64725/64725; mul
2

FLIR TG165-X Specifications

General

Internal storage capacity	4 GB
Sensor type (thermal module)	-
Temperature measurement range	-25 - 300 °C
Image sensor size	2/3 \
Sensor resolution (thermal module)	80 x 60 pixels
Display type	LCD
Certification	CE/CB/EN61010/UL
Product color	Black
Built-in display	Yes
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Operating temperature (T-T)	-10 - 45 °C
Battery capacity	- mAh
Battery life (max)	5 h
Battery recharge time	6 h
Package depth	151 mm
Package width	284 mm
Package height	105 mm
Package weight	94 g

Weight and Dimensions

Depth	64 mm
Width	219 mm
Height	81 mm
Weight	40 g