SWING BUTTON:
This function will oscillate the wind louvres automatically from side to side.
TIMER BUTTON:
Can be set between 0.5 to 7.5 hours easily. Press once for each 0.5 hour incre-
ment added to the desired set time. The set time is indicated by the combina-
tion of timer indicator lights that are on.
ION BUTTON:
Press this button and the built-in ionizer will start to purify the air (please refer
to Ionizer section).
MODE BUTTON:
This button may be used to select the type of wind circulation - Normal Mode,
Natural Mode, or Sleep Mode.
NORMAL MODE:
(when both indicators are o):
Constant wind speed of LOW, MEDIUM or HIGH as set.
NATURAL MODE:
The fan operates in a random cycle of a combination of OFF, LOW,
MEDIUM and HIGH to simulate a natural breeze. By pressing each of
the three wind speeds, a unique natural wind cycle is selected. Note:
when selecting LOW or MEDIUM speed in Natural Mode, the speed is
cycled only between OFF, LOW and MEDIUM.
SLEEP MODE:
Under this mode, the unit will enter a computer-controlled wind
mode, in which the speed will gradually decrease over time.
A. When set at HIGH speed at the beginning, the fan will work at HIGH
speed for half an hour, then it will switch to MEDIUM speed. After an-
other half an hour, it will change from MEDIUM speed to LOW speed.
The fan will stop at the preset time (if Timer function is used) or when-
ever the power is turned o, otherwise it would continue in LOW
speed mode.
To Next Page
Loading...
