Floe VSD 6000 - Page 36

36
STEP 3
-CONNECTING ACTUATORS
CONNECT EACH ACTUATOR WITH RESPECTIVE CONNECTORS. WIRING IS
CONSTRUCTED SUCH THAT THERE IS ONLY ONE CORRECT CONFIGURATION.
STEP 4
-CONNECT BATTERY (
((
(12 VOLT
12 VOLT 12 VOLT
12 VOLT CONNECTION
CONNECTIONCONNECTION
CONNECTION ONLY
ONLYONLY
ONLY)
))
)
CONNECT THE LEAD WITH THE 10-AMP CIRCUIT BREAKER TO THE POSITVE TERMINAL
OF ONE BATTERY
ONE BATTERYONE BATTERY
ONE BATTERY. CONNECT THE OTHER LEAD TO THE NEGATIVE TERMINAL OF SAME
SAME SAME
SAME
BATTERY
BATTERYBATTERY
BATTERY.